CHEVROLET

CHEVROLET

PRODUCT DETAILS

NO SUBSTITUTES: Yeah the projector headlights that came on the C6 Vette's were modern back in 2005, but by today's standards - their light output is dated and it's hard to argue the modern appeal of the C7's full LED setup! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. They are the first and last aftermarket option that the C6 Corvette Community needs, because when it comes to headlights: there is nowhere else to upgrade from here.

PERFORMANCE: We've always been blown away by the fact that even though the C6 came from the factory with OEM HID headlights, the performance was sub-par. The low quality optics inside the lights were not only poorly designed to begin with, but often lose 50% or more of their intensity over time due to de-lamination of the reflector bowl inside - leaving you with next to no light output to illuminate the road. The good news is that Morimoto's 2005-2013 Corvette headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light that will far out-perform even the C7's more modern setup.

DOT APPROVED: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their projector optics meet & exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical/lateral adjusters.

PLUG-N-PLAY: Wiring is easy too! This LED projector headlight kit is designed to work on your C6 Vette without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty.

SEQUENTIAL LED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. They have a fully sequential LED turn signal behind modern "3D" type optics on the outside edge of the headlight too.

WELL-BUILT: Their UV-coated polycarbonate lens will resist the test of time, ensuring your Vette's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring.

THEY LOOK: Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered top of the line original equipment to those who don't know any better. All in all, styling that closely resembles the C7 headlights - making these the best way to facelift your C6.

STOCK SUCKS: No doubt the four oval tails on the Vette is a badass classic design - but if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable XB LED fog lights have been top sellers in our catalog forever, and we couldn't be more excited to see the lineup expand with offerings such as the new high-performance XB LED tail lights too!

COMPATIBLE: With all C6 Vette's from 2005-2013, these complete Chevrolet LED tail light assemblies will swap directly in place of the original C6 Corvette tail lights, use all of the stock mounting points, and should not take more than 30 minutes to install all four.

PLUG N PLAY: Wiring is easy too! The XB LED tails are designed to work without any special wiring. These C6 Corvette tail lights will plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed!

STYLE: These Chevrolet LED tail lights don't look out of place on the Vette either. While their styling is far more modern than the old incandescent tail lights - they're not going to awkwardly turn your Vette into a spaceship either! We love the way they look and think they'd be a welcome upgrade to the rear end of any C6 Corvette.

WELL-BUILT: These C6 Corvette tail lights’ durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB Tail lights may not be the cheapest new Chevrolet LED tail lights for your Corvette, but they're OE quality, and as the saying goes, you pay for what you get. Although the tails are new, we've sold many thousands of the XB Fog lights and to date, have only seen a small handful with problems...no joke.

PRODUCT DETAILS

STOCK SUCKS: No doubt the C7 Vette is a badass design - but if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable XB LED fog lights have been top sellers in our catalog forever, and we couldn't be more excited to see the lineup expand with offerings such as the new high-performance XB LED tail lights too!

COMPATIBLE: With all C7 Vettes from 2014-2019, these complete Chevrolet LED tail light assemblies will swap directly in place of the original C7 Corvette tail lights, use all of the stock mounting points, and should not take more than 30 minutes to install the pair.

PLUG N PLAY: Wiring is easy too! The XB LED tails are designed to work without any special wiring. These C7 Corvette tail lights will plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed!

STYLE: These Chevrolet LED tail lights don't look out of place on the Vette either. While their styling is far more modern than the old incandescent tail lights - they're not going to awkwardly turn your Vette into a spaceship either! We love the way they look and think they'd be a welcome upgrade to the rear end of any C7 Corvette.

WELL-BUILT: These C7 Corvette tail lights’ durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB Tail lights may not be the cheapest new Chevrolet LED tail lights for your Corvette, but they're OE quality, and as the saying goes, you pay for what you get. Although the tails are new, we've sold many thousands of the XB Fog lights and to date, have only seen a small handful with problems...no joke.

 

  • WHAT'S INCLUDED

  • TAIL LIGHTS: 2x 14-19 Chevrolet Corvette XB LED

  • WIRING: Plug n Play connection kit

  • WARRANTY: 10 Years

  • SWAG: Morimoto Decal

  • COMPATIBILITY

  • REPLACES GM PART #: 23219535, 23170469, 23170470, 23219536

  • CHEVROLET CORVETTE: 2014-2019

  • NOTE: Not compatible with non-US spec cars

  • MEETS: DOT, SAE, FMVSS108 STANDARDS

  • TECH SPECS

  • INPUT SOCKET: Chevrolet Multi-pin OEM

  • WEATHER RATING: IP67 Waterproof

  • LENS MATERIAL: High Impact Polycarb (UV-Resistant)

  • HOUSING: Injection molded ABS

  • LIGHT SOURCE: SSC LED (Red)

  • MODES: Turn/Brake/Reverse

NO SUBSTITUTES: Yeah the HID headlights that came on the C7 Vette's perform well enough, but as the saying go: stock sucks! Upgrade your setup to a full LED setup with Morimoto! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. They are the first and last aftermarket option that the C7 Corvette Community needs, because when it comes to headlights: there is nowhere else to upgrade from here.

PERFORMANCE: We've always been blown away by the fact that even though the C6 came from the factory with OEM HID headlights, the performance was sub-par. The low quality optics inside the lights were not only poorly designed to begin with, but often lose 50% or more of their intensity over time due to de-lamination of the reflector bowl inside - leaving you with next to no light output to illuminate the road. The good news is that Morimoto's 2014-2019 Corvette headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light that will far out-perform the stock setup.

DOT APPROVED: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their projector optics meet & exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical/lateral adjusters.

PLUG-N-PLAY: Wiring is easy too! This LED projector headlight kit is designed to work on your C6 Vette without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty.

SEQUENTIAL LED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. They have a fully sequential LED turn signal behind modern "3D" type optics on the outside edge of the headlight too.

WELL-BUILT: Their UV-coated polycarbonate lens will resist the test of time, ensuring your Vette's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring.

THEY LOOK: Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered top of the line original equipment to those who don't know any better.

PREFER VIDEOS?: Check out this video overviewing these lights!

TRUSTED: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? 

DSC SPORT CONTROLLER CHEVROLET CORVETTE C7 2014+

by Meraki Autoworks
$ 1,290.00

The easiest, fastest, and best Plug-N-Play suspension upgrade for your C7 Corvette! The controller, intended for use with the original MRC shocks comes fully pre-programmed and ready to use, replaces the factory suspension control module. The DSC Sport Controller fully and completely interfaces with the factory dash display and controls. Using the DSC Sport tuning software, users have the ability to tune the suspension just like tuning the engine, including full velocity tuning and PTM control.

The Controller serves as an intro package to the DSC Sport system and is perfect for daily drivers and the occasional DE events. Looking for more competitive performance advantages? Check out the Tractive DDA RTs and RTs Plus shock packages with coilover conversion options.

Tables include:
• G Force
• Brake Pressure
• Steering Angle
• Speed
• Acceleration
• Shock Calibration
• Velocity
• Performance Traction Management (PTM)

Customer Testimonial

See Matt Farah of The Smoking Tire test drive a 2016 C7 Z06 fitted with the DSC Sport V3 Controller:

  • In the Event of a Backorder: DSC Sport Controllers that are listed as backordered will be shipped as soon as we receive the shipment from our supplier. If you ordered an item while it was listed as “Backordered” we will not issue a refund.
1-7/8" Stainless Steel Super Street Headers. 2020 Chevrolet Corvette C8. Now Available for Pre-Order!
  • Oval Port
  • Stock Bolt Pattern
  • Flanged Collector Outlet Connects Directly to OEM Catalytic Converters or Kooks Super Street OEM Connections
  • Includes Gaskets and Bolt Kit required for Installation
  • No additional parts required
3" Stainless Steel Super Street Ultra-GREEN Catted Connections. 2020 Chevrolet Corvette C8. Now Available for Pre-Order!
  • Flanged Inlet and Outlet
  • Stock Bolt Pattern
  • Inlet Connects Directly to OEM Manifolds or Kooks Headers
  • Outlet Connects Directly to OEM Cat-Back
  • Replaces OEM Catalytic Converters
  • Kooks Ultra-GREEN EPA Certified Cats Feature a 304 Stainless Steel Outer Body and a High Capacity 300 Cell 4-1/2" Diameter Metallic Substrate Designed to Be Used with No Tune Required
  • Includes Gasket and Bolt Kit required for Installation
  • No additional parts required

KW COILOVER V3 CHEVROLET C8 CORVETTE STINGRAY

by Meraki Autoworks
Sold out
$ 3,679.00
KW Variant 3: Race technology for the road, with adjustable compression and rebound dampening.
State of the art motorsport technology enables better performance on the streets. The independently adjustable compression and rebound dampening allows for custom driving setups.
The exclusive KW patented system has dual level valves that allow for adjustment of the rebound dampening for your road comfort and the compression dampening that controls the driving dynamics.

KW COILOVER V3 CHEVROLET C8 CORVETTE STINGRAY with Electronic Dampening EDC bundle

Lowering

Front Lowering: 0.0" to 1.0"
Rear Lowering: 0.0" to 1.0"

Notes

  • 01: Front and rear height adjustable by threaded shock bodies
  • 403: Not for cars with original lift system
  • 67: Valving is adjusted by adjustment knobs, rebound is only adjustable if the top of the piston rod is accessible. This will depend on the design of the vehicle.
  • 88: Electronic dampening control has to be deactivated. Deactivation kit is included.